- To access the Netgear configuration page, connect your ethernet cable into the LAN port (Second large port in from the right at the back of the device).
-
Once connected, open your web browser ( Internet Explorer, Firefox, etc) and enter the address 192.168.61.1 into the address bar and click Go or hit enter.
-
You will be asked for a login. Enter the username and password found on the base of the device. You should now see a web page which holds all the settings for your Netgear ATA/Router.
-
To access the VoIP section, click the VoIP settings link on the left hand side menu.
-
Under the service heading, enter the SIP Proxy as: sip.blueface.ie
- Next under Line1 enter: Line Enabled = yes, Display Name = your username , Telephone Number = your username, User Name = your username, Password = your password
- Under supported codec, tick all the boxes.
- To save these settings, click the Apply button on the bottom of the page.
Advanced Configuration
-
Open your web browser (Internet Explorer, Firefox, etc) and enter the address http://192.168.61.1/set_voip.htm into the address bar and click Go or hit enter.
-
When asked for the username and password if you have a non-customised firmware enter admin and password, if you have a Blueface customised firmware enter admin and 8lu3fac3L2.
- Enter in the settings as shown in the screenshot below replacing username with your own Blueface username and entering your Blueface password in the password field. Once complete scroll to the bottom of the page and press Apply.
