Plug the network and power cables in as instructed on page 7 of the configuration guide.
Once the base station and handset are powered up determine the IP address of the base station using the menu on the handset. To do this select Menu > Settings > Base > Local Network, enter the System PIN of 0000, > IP Address and the IP address of the base station will be displayed. If your network does not use a DHCP server to assign IP addresses automatically you will need to manually set the IP address of the Base Station at this point.
Once you have determined the IP address of the base station go to your PC and type the address into your browser's address bar in order to access the configuration menu for the Gigaset.
On the initial login page again enter the System PIN of 0000 and then click Ok. On the main menu screen click the Settings tab and then the Telephony menu option on the left hand side. Click the Edit button on the right hand side which should bring you to the settings screen as shown below.
Fill out the details in your browser as shown in the screenshot below using your Blueface username and password where indicated, once completed click the Set button, wait 10 to 20 seconds and your phone should then be connected. No setting changes are required on any of the other pages.
For customers with problems with DTMF (interactives tones, used to enter a PIN number for example), you can edit the settings on your Gigaset C450IP by going to Settings -> Telephony -> Edit -> Advanced Settings and you will arrive at the necessary screen where you have to click 'Audio' and 'RFC2833' and then the tones will work on the handset.
