You are here... Help & Advice Device Configurations Camrivox Flexor 500 IP Phone

Camrivox Flexor 500 IP Phone
Camrivox Flexor configuration

When purchased from Blueface, your Camrivox phone will be pre-programmed to download your SIP account settings automatically, and involves no user interaction. Once first turned on and connected to the internet the ATA/router will download an up-to-date firmware and SIP account profile which is applied within 5 minutes.

When the phone has registered successfully with your Blueface account, the 500 IP Phone will pass all of its loading stages and display the time/date.

For those who have an un-provisioned Blueface firmware, below are the instructions on how to configure the device with your Blueface user account.

  1. Insert the CD included in the box and install the desktop client Voice Connect (or go to www.camrivox.com and download software manually).
  2. Connect your IP Phone to your broadband modem/router via an Ethernet cable and insert power cable and phone handset to the appropriate ports.
  3. Upon first boot, wait 5-10 minutes before attempting to log into the firmware.
  4. Launch the Voice Connect application and it should display any detected Flexor devices in a grid - right click on the found device and select "Configure".
  5. Once logged into the Management Console, select "Accounts" and match the fields for the Service Provider to the entries below and save the settings:

    Camrivox Flexor 500

  6. Match the fields for the "Account Settings" to the entries below (replacing Blueface username & password with your own Blueface username & password) and Update settings:

    Camrivox Flexor
  7. Once returned to the Main Menu, click "Reboot" for the changes to take effect. Once the "Line" light stops flashing red, the VoIP line has registered.

    Camrivox Blueface

Once the Voice Connect application is closed, it will show any incoming calls with a desktop pop-up and store all call history information (although this is not needed to be running for the ATA to function).

If purchased from Blueface, the 500 will be pre-configured and can be remotely upgraded by a provisioning service so no action will be needed to setup the ATA with Blueface nor is the Voice Connect application required.

Back to Top