You are here... Help & Advice Device Configurations Camrivox Flexor 151 Adaptor/Router

Camrivox Flexor 151 Adaptor/Router
Camrivox ATA

When purchased from Blueface, your Camrivox ATA/router will be pre-programmed to download your SIP account settings automatically, and involves no user interaction. Once first turned on and connected to the internet the ATA/router will download an up-to-date firmware and SIP account profile which is applied within 5 minutes.

When it has has registered successfully with your Blueface account:

  1. The 151 ATA "line" light will stop flashing red and stay off.
  2. The 500 IP Phone will pass all of its loading stages and display the time/date.

    Camrivox Flexor Phone

  3. Match the fields for the "Account Settings" to the entries below (replacing Blueface username & password with your own Blueface username & password) and Update settings :

    Camrivox Flexor Configuration
  4. Once returned to the Main Menu, click "Reboot" for the changes to take effect. Once the "Line" light stops flashing red, the VoIP line has registered.

    Camrivox Flexor Blueface

Once the Voice Connect application is closed, it will show any incoming calls with a desktop pop-up and store all call history information (although this is not needed to be running for the ATA to function).

If purchased from Blueface, the 151 will be pre-configured and can be remotely upgraded by a provisioning service so no action will be needed to setup the ATA with Blueface nor is the Voice Connect application required.

Back to Top